How long to strip and rebuild a type 4?

Discussion in 'Mech Tech' started by top banana racing, Mar 7, 2014.

  1. What's with the extended sump plug? :thinking:
     
  2. While I'm at it, yet another moan about parts.
    Bought a new oil pump to replace the one that "broke" (due to poor parts)
    This time I GENTLY tried it and lo! It didn't fit! :mad:
    This being the reason.
    image.jpg

    image.jpg

    image.jpg

    :mad::mad::mad::mad::mad:

    At least I noticed this time and ground a couple of mil off the end of the gear shaft.
     
    Last edited by a moderator: May 20, 2014
  3. Looking good tho, were you off today then?
     
  4. The PO had helicoiled the sump plug with an obscure thread, that's the bolt that fits.
    It's an M14 but very coarse so re helicoiling wasn't an option. Short of welding it up and starting again I figured this option was :
    A) working
    B) nearly new
    C) free!
     
  5. Nope just doing 2 hours a night on it or it'll never get done!
     
  6. Alternator hangs off the fan housing, but there is also a bracket that goes between the fan housing and the heat exchanger that the alternator adjustor bolt goes on on. Do you need that bracket as I think I have a spare?

    Might also have a spring clip for the breather box. Will have a look.
     
  7. I must get some pictures under and around Ted so I can see what Bill is missing.
    I definitely don't have those bits Nick.
     
  8. Razzyh

    Razzyh Supporter

    I've got the bracket for the alternator if you want it. It's the U bracket that goes on the fan shroud
     
  9. I've been on nearly 2 years now like!!!
     
  10. TBR, I go through that oil pump issue with every engine I build :lol:
     
  11. That'd be great, I'm determined to get this built for Johann when he gets back from SA. It'll be his (and therefore my daughter's) start in life if I get it right. :)
     
    paradox and Paul Weeding like this.
  12. Zed

    Zed Gradually getting grumpier

    No pressure then. :)
     
  13. Afraid I can't find a breather clip - have a horrible feeling I threw it away :(

    I do however have an alternator bracket that goes between the fan shroud and heat exchanger - which is yours for free is you want to pick it up when passing sometime :)

    IMG_4352.JPG

    Fits roughly like this:

    IMG_4355.JPG

    The bracket @Razzyh has is I think the one that the bottom left bolt on the alternator goes through.

    Do you want more photos showing how the alternator fits? I need to take mine out of the van again tomorrow and so can take some more pics as I go :(
     
    paradox likes this.
  14. They're the ones I don't have! :)
    I'll pop in when I'm passing. Cheers Nick.
     

Share This Page