got my engine appart at the moment and want to clean the years of muck that is on the outside and inside of the case . what you guys recomend for doing this either by dunking it a bucket or scrubing with rags ? any good or bad stuff to use type 1 engine
I've used thinners/white spirits to clean my case, works pretty well, put some in an old household cleaner squirty bottle (mr muscle) etc, give it a good squirt and a scrub with cheap hard tooth brushes (pack of 10 for a quid) then squirt it again clean, wipe off or just leave it to evaporate.
Dishwasher's good for a final rinse, but I wouldn't use powder. You can't beat petrol* *disclaimer - it's not best practise.
Why not have a romantic night with the missus in the bath? With enough bubbles, she may not notice you're scrubbing your crankcase...
Type 1 engines can't be 'hot tanked' or 'acid dipped' because the case is magnesium, you'll come back to a pool of goo. Stateside do acid dip followed by hot wash on type 4 - they do Type 1 engines too but their website doesn't list what they do. Remember to take out the oil relief valves first. I found that Gunk (the green one is more environmentally friendly) followed by a steam pressure wash is suitable for general cleaning.
Thanks a few idea's to have a go at not looking for a super shiney case just want to get the years of baked on crud thats on the outside and a good clean to get rid of any crap on the inside