Breaking 79 LHD Westy

Thanks

 

Excellent news, I'll take it, before you post it to me..
would you also have the washer wipe / indicator switch unit and the lower plastic cowl that shrouds the ignition switch/wiring?
(Of the 1 down 2 up positions on the wiper stalk, only one (1up) seems to move the wipers..slowly. Is that normal or should there be two speeds, is the 1down supposed to do anything.
Is there a micro switch in there linked to the wash function, or is that something I'll be adding myself;-) ?
Can't see how to pm on here, to give you address.

 

Hi Paul
do you have the two coat hooks available http://thelatebay.com/index.php?threads/coat-hooks.42320/

?

 

Hi,
there is the interior still to have? please pm if available
cheers

 

Hi Paul - longshot as I am late on your post - do you have the clip that connects the heater cables to the dash bracket? pictures attached - I couldn't tell from the dash photo you put on an earlier page.

Thanks Ian

 

I'm allso after this so thanks for the photo been looking for 1 !! I allso need the cold air flaps bar from leaver to the mech !!

 

Hi mate have you got cushions for bed plus door trimming.

 

Front Beam any good?!

 

Possibly Ian, I'll have to have a look

Is your van a 79? As they had the one year only flap system where the flaps are operated by one lever straight off the levers, and the flaps are joined together by a piece of plastic!!

All cushions and door trims are gone

Front beam was good, and has gone

 

Hi dude have you got the heater levers for dash interior light needed plus visors if any cheers dude.

 

Hi mate have you got roof lining for bay and tensioners mine was taken out before purchase also need visors.

 

do you have the cargo floor section from the B pillar to the rear wheel tub on the sliding door side? only need the very outer part of it (about 5" or so wide)

 

Hi dude have you got glovebox liner and door interior handles any parts considered plzz.

 

Unfortunately not... I have a small quantity of tin that isn't for sale I'm afraid!!

 

I've got the interior cab door handles... the mini arm rest ones that are held on with 3 screws!!

 

I'll have to double check, as there is a certain amount of "plating" that has been done to the cargo floor

 

All gone/knackered

 

Hey,

Have you still got the front 1/4 light window/frames from either side? would you split from the door?

 

I do... I'll have to check the state of them as the doors are shot!!