So I got started on coating the inside of the rear right outer fender. So I hopefully can get started on putting som new metal on the bus. First I cleaned it from transport colure then treated it whit phosphoric acid. Rubbed it down with 80 grid. Then three coats of 2K epoxy primer. I’m buying Paint and filler from my local auto body shop guy. So I can get good advices on doing the preparation before paint. Skickat från min iPhone med Tapatalk
Ok I messed up that post was supposed to end up I'm my Swedish 78 bay taxi tread!! Does any one know how i can move it there??
