Australian Poptop removed.

Discussion in 'Restorations' started by sANDYbAY, Dec 16, 2014.

  1. Zed

    Zed Gradually getting grumpier

    Doesn't look too bad, apart from the GRP. :mad:
     
  2. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    That's what I thought Steve, I'm no welder but it looks eminently repairable. I'm pinning my hopes on the fact that the guy who's doing the welding for me actually repairs the radar dish covers they have on warships.
    They're probably made of carbon fibre composite or some other posh material but if he can work to the standards demanded by the MOD then my little glass fibre Poptop hopefully shouldn't present him with too many problems.
     
  3. Zed

    Zed Gradually getting grumpier

    The trick to fixing holes in GRP is to bevel either side of the hole so your new bit can't fall out. :thumbsup:
     
    sANDYbAY likes this.
  4. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    I might ask him if he can cover it in carbon fibre.
     
  5. Zed

    Zed Gradually getting grumpier

    It'll probably come back like new and you'll never know how he did it. :thumbsup:
     
    sANDYbAY likes this.
  6. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    A couple of pictures showing the method used to fix the headlining and curtain. For my reference when I'm putting it back together but they also might help others with the same poptop.

    [​IMG]

    [​IMG]
     
    Baysearcher likes this.
  7. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    Bit further on the roof now. This is the VW vent in the centre of the Poptop.

    [​IMG]

    We've never opened it the whole time we've had the van and as you can see its been leaking a tiny bit and has started to spoil the headlining.

    [​IMG]

    So I've decided that I'm going to alter the lift up bit and fasten and seal it permanently onto the Poptop and put the new headlining straight across so the vent doesn't show from inside.

    Here's where it is at the moment, waiting to go back on the van for its trip to the welders.

    [​IMG]

    Do you think there's a market for used, slightly rusty staples?

    [​IMG]
     
  8. Ebay them and see. :p
     
  9. are those pics upside down
     
  10. Razzyh

    Razzyh Supporter

    No, its an Aussie roof :)
     
    sANDYbAY likes this.
  11. Razzyh

    Razzyh Supporter

    Here's an idea why not glue vehicle carpet to the roof rather than headlining?

    [​IMG]
     
    paradox likes this.
  12. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    That's what I was trying to say but getting the reply to load up was taking so long I got bored and went away to do something else.
     
    Razzyh likes this.
  13. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    Yeah, that looks nice.
     
  14. Razzyh

    Razzyh Supporter

    You could get a lighter colour if you wanted and much easier to do than headlining.
     
    sANDYbAY likes this.
  15. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    I've just ordered some stretchy carpet to cover all the hot air pipes above the kick panels so they aren't quite so 'in your face'.
     
  16. Glad we were was out all day I bet the language was a bit strong
     
  17. sANDYbAY

    sANDYbAY On benefits-won't sponsor!

    I must admit I said "Gosh Darn It, they're a bunch of scallywags" a few times.
     
    Razzyh likes this.
  18. Zed

    Zed Gradually getting grumpier

    But were you really surprised?
     
  19. doh really :easter:
     

Share This Page