FOR SALE Bits to collect from Busfest (Saturday)

Discussion in 'Late Bay Parts Classifieds' started by moominbus, Aug 31, 2014.

  1. [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    O.k, so here is my collection of bits to sell, I'm going to busfest on Sat so I can take them along to that or you can collect from Stroud, Glos. I'm not at all keen to post anything and wont have the opportunity for a while either.
    As for prices;
    Dormobile table £35 (a couple of small abrasion marks on the top)
    The rail for the table to attach onto £5
    Cylinder head shrouds SINGLE PORT £5 each
    Bosch starter solenoid £20 (used but not for long, the replacement starter I got came with a solenoid - this is a different fit so no good as a spare for me)
    Fuel pump £5 (not used- wouldn't fit with my carb and dynamo set up)
    Cylinder head studs SINGLE PORT £5
    Pushrods £5
    Dormobile opening roof vent seals £6 for the pair (new in bags)
    Dormobile stove £10 (needs cleaning before use or attempted use, enamel missing in a few places, maybe good for spares)
    Sliding door bracket £3 (3 hole version with fitting screws and washers)
    Any of the following for a shiny £2 coin;
    Steel fuel filler pipe
    fuel filler neck flange
    Tin for behind the pulley (scored by the pulley wheel but intact and usable)
    oil pump cover
    Wing mirrors (no glass, one has the cut and stick stuff on it - gives a 'hall of mirrors' effect!)
    SINGLE PORT manifold (with blocked breathers - needs a good clean)
    A single pound coin will get you either;
    Fuel pump flange
    Broken Dynamo (12v model but only puts out 6v - fix if you're clever or use for exchange?)
    And finally a couple of Late Bay Love items for free;
    heater tubes (none have the metal inserts at the end)
    under cylinder deflectors (in need of wire brush and paint)

    All prices include V.A.T and scene tax!
     
  2. [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Oh yeah, the mains hook up connectors are £2 the pair. Thanks.
     
  3. I'm after a factory middle window and/or seal if anyone going to the show is interested in some sort of swop? I'll be going to the Berkeley castle vw show later in the month too...
     
  4. Is this all 1600 type 1 engine stuff?
     
  5. I ll take the engines studs off you, hoping to go to busfest on Saturday.
     
  6. @Spacecowboyuk - yep, 1600 type 1 stuff (not sure about the heater tubes) some of it is for single port 1600's rather than twin port. Most of it will fit beetle engines too.
    @JohnSly - They are yours! PM me your mobile number and I'll find you on the day.
     

Share This Page