VWH stainless exhaust

Discussion in 'Panels, seals, doors etc' started by Pod, Apr 20, 2014.

  1. Pod

    Pod

    Replaced this
    [​IMG]

    With this
    [​IMG]

    A very good fit and all lined up pretty well, the only real difficulty was that the nuts supplied with the fitting kit were 13mm hex M8's which were too tight for the bottom fixings on the manifold so replaced with 12mm's and all good.

    Sounds good with a slightly lower tone than stock but definitely not loud and quality seems excellent. Only thing I forgot was some air hose as it needed to be rerouted direct to the heat exchangers but a trip to GSF solved that one. Price was good compared to other SS systems at about £260 with LB discount.

    Off to Devon tomorrow so that will be a good test, can't show a pic of it fitted as it's lashing it down here now.
     
  2. On my shopping list I think... thanks for the review
     

Share This Page