Good evening Does anyone know the diameter of the holes that the white 2-piece bungs go into at the front end of the sills inside the front arch. Need to drill mine before i weld in my outer b-post that these holes are in. Bung part number is 211809673A In the garage now awaiting a rapid response so i can crack on As usual, my descriptions are probably confusing. Cheers Jeff
Ooooo if (@77 Westy) has them to hand and could measure the OD of the bung or even better the diameter of the open hole that would be fantastic
I didn’t drill holes in the front of the sills but those blanking plugs are the same as the ones in the inner rear wheel arch – Heritage describe them as ‘This blanking grommet is used to blank unwanted drain holes in inner wheel arches’. The hole is 14mm diameter and I used plastic self-sealing plugs from https://www.bresco.com/