Here is what I have so far for my Subaru swap feel free to add anything that you think I should be looking at and or changing. Engine Loom Shortened sump Radiator and fans I’ve spoken to Nick Tune about a bracket for the alternator relocation as the inlet manifold has been reversed so hope he will sort that for me this week. So I have the internal heater, rad hoses, brackets to mount the rad, gearbox bellhousing adaptor, and engine support bar to get anything else I should add to my list thanks for any advice Ian
@Razzyh @pkrboo when you say you used T25 pipes for the radiator on your Subaru conversion I assume the long ones that go right to the front ? And you said you used straight pipes and bends on the last one Matt which worked out better thanks.
I am thinking of building my own rad scoop as we have a sheet metal firm we use at work and he says he can make me one very cheaply if I give him a drawing to work too
That look about what I was aiming for I think landrover/ rangerover rad s are what people tend to use with aftermarket fans
Ok picked up an exhaust today off the same guy who wanted my 1500cc beetle engine so swap and a bit of cash his way I’m really happy with that.
Yeh it owes me £300 so I thinks it’s a good deal but may need to have another sensor port fitting to it as my engine has 2 sensors.
Thanks to @just-paul i now have a couple of T25 water pipes and an Aluminium header tank. Just need @Razzyh or @pkrboo to tell me how they got a bead on the end of them
Cut them to length and then warm the ends up and push down on a piece of wood to give it the lip. Can do a video tomorrow if you want.