Definitely went to put the new dampers on but couldn’t The metal sleeve in the bottom of them are way to long can’t even get the nut on a thread Sent from my iPhone using Tapatalk
Boge dampers from schofield comparing them to my old ones it looks like the metal sleeve in the top is the same but the one in the bottom is way to long Sent from my iPhone using Tapatalk
Pop the rubber out and zip cut to size. It’s possible that they used an oversized bit.. Sent from my iPhone using Tapatalk
So after far too long I'm back on with the bus built myself a new work place at home in the garden and a couple of weeks ago built up the underneath and brought him back to finish off Sent from my JSN-L21 using Tapatalk
Cheers mate makes such a difference having somewhere at home to store these project rather than an hour round trip to work on it Sent from my JSN-L21 using Tapatalk
Both sides now done so onto the last piece of the puzzle and I can pack the welder away for Abit Sent from my JSN-L21 using Tapatalk
Started on Abit of body prep back down to bare metal and sand fill sand prime Sent from my moto g(7) power using Tapatalk
Getting those rear quarter panels flat is a horrid job! It took me an absolute age. The bug by comparison only needed a few skims to get right.
Yeah to be fair the rear corners are pretty good the only issue getting smooth was round the bottom where I had welded in new battery trays plus I've now found my least favourite job ha Sent from my moto g(7) power using Tapatalk
Been slowly making progress and finally got it all in paint Sent from my moto g(7) power using Tapatalk
Fun enough I was going green originally but changed to oyster white Sent from my moto g(7) power using Tapatalk