Paras bus resto

Discussion in 'Restorations' started by paradox, Aug 10, 2011.

  1. Merlin Cat

    Merlin Cat Moderator

    BAD3E238-46B5-4C3B-8466-5CFA1042E4AC.jpeg Do you need to use a silicone gun for it @paradox ?

    could you use one of these types?

    BAD3E238-46B5-4C3B-8466-5CFA1042E4AC.jpeg
     
    paradox and F_Pantos like this.
  2. davidoft

    davidoft Sponsor

    My work here is done :D xx
     
    art b and Merlin Cat like this.
  3. Merlin Cat

    Merlin Cat Moderator

    :)
     
    davidoft likes this.
  4. @davidoft was correct it was too cold
    So it wasn’t the guns fault but thanks for the suggestion
    I warmed the tube up in front of the wood burner today and it squeezed out ok
     
    davidoft, Merlin Cat and F_Pantos like this.
  5. I've been away from the site for ages (life got in the way), popped back for a peek-about - this is the first thread I checked in on.

    Good work Para, keep going mate
     
    mgbman, rob.e, JamesLey and 1 other person like this.
  6. Cheers foxy nice to have you back
     
    JamesLey likes this.
  7. davidoft

    davidoft Sponsor

    does that mean I should sir in front of the log burner , before squeezing out a log :D
     
    Dubs and JamesLey like this.
  8. Yes.... the family will be impressed ..:thumbsup:
     
    Kruger and davidoft like this.
  9. Got the engine bay seam sealed and started sanding the ceiling
    [​IMG][​IMG][​IMG]
     
    Crispy, paulcalf, bagpus and 6 others like this.
  10. I’ve taken the tailgate off and brought it home to prep and paint.
    [​IMG]
     
    Valveandy, mgbman, paulcalf and 4 others like this.
  11. I’m glad I pulled the glass from it
    [​IMG][​IMG]
     
  12. That's not too bad, but best stopped.
     
    paradox likes this.
  13. I think I’ve caught it just in the nick of time.
    [​IMG]
     
    Valveandy and Lasty like this.
  14. Hows you old mate you ont road yet been following you build for a while. Looks good

    Sent from my SM-T585 using Tapatalk
     
  15. Razzyh

    Razzyh Supporter

    Considering it was done by a ‘pro’ (used loser than a lose poo!)

    I don’t know where you get the inclination to do it para, I’d of been bored long time ago.
     
  16. Rear hatch primed and painted
    [​IMG][​IMG][​IMG]
     
    mgbman, Valveandy, davidoft and 10 others like this.
  17. JamesLey

    JamesLey Sponsor

    Spot on fella!


    Sent from my iPhone using Tapatalk
     
    Hulkmeister and paradox like this.
  18. I’ll have to go over the outer skin with the roller to get it the same texture as the rest of the bus.
    But with the weather surprisingly warm and dry today I was glad of the opportunity to get some paint on it to seal it up.
    Fingers crossed it doesn’t drop too cold tonight.
     
    Deefer66 and JamesLey like this.
  19. Noice work on the tailgate.
    9ec7e80d2e05e9e895d886487eb424bd.jpeg

    Wish it was warm and dry here. Been cold and drizzly all day. :(
     
    davidoft and paradox like this.
  20. Great work thanks for sharing, Ive goto get my mojo back on mine when weathers s bit better, much the same crap job by 'pro's', time for me to have a go. Your thread is a wealth of info & motivation, cheers
     
    Lasty, paradox, vinnyboy and 2 others like this.

Share This Page