I am wanting to change the leaking front pulley seal on 2.0 type 4 with a double lip viton seal. Can anyone confirm if the inner dimension is 41 or 42mm. Most retailers don’t list the size. One that does says 41mn another says 42mm. All a bit vague.
I've a new stock one in a box at home.. cam measure up later if any use? Sent from my SM-G930F using Tapatalk
Works well on rear crank or should i say not leaking yet Local bearing suppliers only had 8mm wide which probably would have been ok. But went for correct one on flebay
75x95x10. However the depth in some cases varies. Search thread “Oil seal recommedations” Some good info