Think my old draper socket set is getting a bit worn And yes works a treat... I'd tried chisel on the corner, blow torch, cutting a screw head across the top.. this got it first go ...and no Barry please don't... or your rounded nuts.. Sent from my SM-G930F using Tapatalk
Amazon... Reelva 10pcs 3/8" Drive Socket... https://www.amazon.co.uk/dp/B01N8PEJIF?ref=ppx_pop_mob_ap_share Sent from my SM-G930F using Tapatalk
I’ll have a look on there,I’m after a bush removing tool for the idler pin Sent from my iPhone using Tapatalk
Take one idler pin and an old child's swing leg or similar 1.5 ish mm wall tube .Cut off about 12cm of tube , slit and place over idler pin. Job done.
Bought one of those a few years back now best thing I've bought it has got me out of the smelly stuff a few times . Especially with bolts and nuts that the heads have corroded . Yes they trash the nut or bolt but have yet to come across something that those haven't shifted Sent from my FIG-LX1 using Tapatalk