Sliding door

Discussion in 'Mech Tech' started by iblaze, Jul 20, 2019.

  1. iblaze

    iblaze Supporter

    Hi all
    Can someone please tell me what these threaded holes are for on both edges of the sliding door.[​IMG][​IMG]

    Sent from my SM-G960F using Tapatalk
     
    iblaze, Jul 20, 2019
    #1
  2. davidoft

    davidoft Sponsor

    A plastic trim
     
    davidoft, Jul 20, 2019
    #2
    iblaze likes this.
  3. mikedjames

    mikedjames Supporter

    [​IMG]
    Champagne Edition - but I found a picture which had the same holes shown in a 1969 technical manual so there must have been an option to fit them . I wonder if e.g. those airport taxi/buses shown in the literature had them too, and the Champagne Edition was actually an excuse to empty the parts bins...of soon to be redundant Tupperware..
     
    Last edited: Jul 20, 2019
    mikedjames, Jul 20, 2019
    #3
    ckandjk and iblaze like this.
  4. snotty

    snotty

    They are indeed for plastic trim pieces. You can get the front one, but not the rear for left-hand sliders.
     
    snotty, Jul 21, 2019
    #4
    iblaze and ckandjk like this.
  5. ckandjk

    ckandjk

    A3EB2AC9-E46E-4F94-8554-809E9C01E15F.jpeg
     
    ckandjk, Jul 21, 2019
    #5
    snotty and iblaze like this.
  6. rob.e

    rob.e

    Always wondered what I was missing there...
     
    rob.e, Jul 21, 2019
    #6

Share This Page