Due to using what I had in stock I have a couple of jubilee clips in me fuel system, I might as well change the lot, looking on ebay Im not sure which is the best the screw type or the springy ones??
I use the (Swedish?) stainless screw jobs - not that expensive. Plenty around. Important to get the right size so they clamp up properly.
ABA... https://www.advancedfluidsolutions.co.uk/aba-stainless-steel-mini-fuel-hose-clips-235-c.asp Sent from my SM-G930F using Tapatalk
Authentic, then VW used these. https://www.ebay.co.uk/itm/BZP-SING...hash=item33d71b2882:m:mFIKFliZ8kOVNEHVuOodiiA
They’re the ones! Best to measure the OD of the hoses, so you get the right size. Wrong size, and they don’t clamp up properly.
^whs^ depends on the od of the pipe you've bought.. I think I used codan at 5.6 ID which is 12.2 OD so I used ABA12's which are 11.5 -13mm range I think Volksbolts say use the 11... Sent from my SM-G930F using Tapatalk
On my fuel injection set up I used 28 screw type clips, measure the OD of hoses for correct size. Jubilee clips just eat into rubber hose or squash filter lines.!
@PIE Bearing man at Shrewsbury will help you, they also do Gates fuel hose Behind Tesco at Harlescott on another note did i see you at Diva Dubs with the bay and the Splitty ?
Yea you should have said hello, the split won but the bay was an also run much to the wife disgust who loves the bay more, I know the CEO of bearing man he was nearly me next door neighbour and I see him in me local pub now and then!!
i think we did speak, did you have single wheel trailer on the Bay ? Is it Steve at bearing man by any chance ?