My rear disc conversion

Discussion in 'Modified Shizzle' started by pkrboo, May 8, 2019.

  1. Moons

    Moons Supporter

    Extended ones
     
    pkrboo likes this.
  2. well, first test drive was a success, as I didn't die.

    one hub is a bit warm so i need to look at that, not sure if its the hub nut or the caliper is a bit sticky. handbrake needs more adjustment too

    all in all i have a nice hard pedal now, with very little effort or distance for the pedal to travel before i am at a complete stop.
     
    redgaz, Valveandy, Kruger and 3 others like this.
  3. New brakes needed bigger 15" wheels.

    So ready for new tyres tomorrow I have started to paint them

    3 stage process grey primer followed by white primer followed by gloss white enamel. All Halfords own brand stuff. They'll do for now[​IMG][​IMG][​IMG]
     
    Iain McAvoy, Valveandy, StuF and 2 others like this.
  4. Quick pic of the rear setup with 15mm spacer.

    And the new space saver wheel. From an E270 Merc so it already has the right size centre bore to fit front or rear(I hope)[​IMG][​IMG][​IMG]
     
    rob.e, Kruger and davidoft like this.
  5. looking good

    i refurbed a set of TE37 rays wheels for my daily with halfords paints - impressed with the quality and finish. When i paint a wheel i usually put some bluetac or plasticine into the bolt holes to avoid any paint build up when the nut seats to the wheel (sorry if this is teaching you to suck eggs etc) just don't want you to lose a wheel :thumbsup:

    are you using the vw nuts? i found with my caddy wheels (and the zenders too actually) that although they were ball seat there is a difference and the vw nuts weren't a good fit. there are large and small radius nuts - can't remember which i needed but you can google it.
     
  6. MorkC68

    MorkC68 Administrator

    Superb!

    Another string to your post RAF skills :)
     
    pkrboo likes this.
  7. Yeah the nuts are probably a bit big on the radius but they are a toght fit. Will see if I can find some smaller radius ones.
     
  8. Subaru manifold stripping and cleaning today
     
    MorkC68 likes this.
  9. MorkC68

    MorkC68 Administrator

    Sliding window fitting here whilst I’m resting!
     
  10. Glad to see you got set up all working, tbh ours did improve braking but not sure if it was discs alone as replaced MC, brake lines, fitted braided hoses and replaced fluid at same time. Had to skim 3mm off discs as too close to calipers. Handbrake is so much better even other half can use it now.
    Only thing I noticed on the trip to and from Stanford one wheel slightly rubs too I wonder if piston had been fully rewound. On to do list before next show in a few weeks..........
     
  11. davidoft

    davidoft Sponsor

  12. I need Porsche pattern


    Sent from my iPhone using Tapatalk
     
    davidoft likes this.
  13. we've sorted it though ;)
     
    davidoft and 1973daisey like this.
  14. Love a challenge


    Sent from my iPhone using Tapatalk
     
    davidoft likes this.
  15. davidoft

    davidoft Sponsor

    just drill a few holes :D
     
  16. How did you get on with those four pot callipers and vented discs for the front Matt ?
     
  17. Milky

    Milky Sponsor

    Yes definitely. Now they have moved on to the electric calipers and done away with the cables and inboard brake shoes things are much simpler and efficient . For a mechanics point it's simple. Plug in with diagnostics and set to service mode on EPB , change discs and pads (never just pads nowadays) and reset the diagnostics .Yet to change a electric caliper and only had to deal with a dodgy switch on a elderly B6 Passat and rodent damage on wiring .Early rear discs are a faff about but drum brakes were always fiddley and going out of adjustment even with the later self adjusters . Rear disc brakes with the electric park brake gets a thumbs up from me .
     
  18. Milky

    Milky Sponsor

    We let a customer borrow a ramp to fit a brand new Red9design rear suspension and brake setup to his Split bus a few years ago and no matter what he tried he could not get the handbrake effort up to MOT standard . After some research he discovered the spec of handbrake pads are just not up to the weight of the vehicle Basically not man enough for the job .Not trying to be negative but please be aware of this .
     
  19. not fitted the 4 pots yet, they are only for solid disc not vented, but i have a way forward on a vented disc setup now......
     
    Razzyh, paradox and davidoft like this.
  20. anyone knows any combo discs/ calliper that goes under OEM rims?
     

Share This Page