How you going to fix the panel? I've got the same to do. Got all the bits but havent got round to it.
Plan is to use z brackets on the edge of the frame attached to p clips on the luggage rack bars. Just hoping it all lines up! Sent from my Pixel using Tapatalk
I think that's a good call, will help with shade issues. Initial install will be fixed though as I need it on ready for the f1 Sent from my Pixel using Tapatalk
Done with a bit of temporary fixing for the wiring. Attached to bars with P clamps Fed the wires under the rack and through the poptop: Fed along the edge of the opening and through an existing hole Out through the ply lining, I had to notch the wardrobe Controller in place Charge to leisure battery, partially charged and not bright sunshine And also a trickle to the starter Sent from my Pixel using Tapatalk
No need to apologise I got all the bits from amazon, the panel is the same price as going direct to photonic universe: Controller £80.09 https://www.amazon.co.uk/gp/product/B00JYBODWW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Panel £139.99 https://www.amazon.co.uk/gp/product/B01BCK7216/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1 P clamps £3.50 https://www.amazon.co.uk/gp/product/B00X2Y2ZR2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 So total for that lot is £223.58 you will need some fuse holders if you don't have a fuse box near the leisure battery (I plan to install one soon to neaten things up) and probably some additional 4mm wire and some sundries. Should come in under £250 (or £150 if the wife asks) If you think you may add additional panels in the future it may be worth going to the next model up on the controller for an extra £20: https://www.amazon.co.uk/dp/B00JYBZG96/ref=twister_B078MYGGST?_encoding=UTF8&psc=1