Is the probe thing quite flexible ? Was having a look to see how to do it, and it looks like it's actually quite tight and awkward corners to get into, I wonder if the probe would get to all the bits.
It's a 0.5m nylon probe about 4.5mm thick (I measured it), with a 360º nozzle on the end. Just slap it on the top of the aerosol. I'd imagine it'll fit into a beam. Worst case, you could drill a couple of extra holes.
Yeah I know, but I just wondered whether the Lance would be flexible enough to reach the awkward corners, as snotty said probably need at least a couple holes, I originally thought I would only need one hjole
Finished scraping all the underseal off What a flippin job that is, drove me mental Started going over it all with white spirit to get rid of the residue. An equally crappy job, pretty much had a bath in white spirit. On the plus side though it's all pretty good under there and will look tiptop when painted.
Most underwhelming update. Had stripped all the pedals off, to clean paint etc. Can't remember which one this is but it's all painted up, greased and lovely